The legendary audio brand – which will be exhibiting at ISE 2024 – has developed the IPX Series power amplifiers to meet the needs of mid-to-large fixed installation projects. The post Dynacord’s IPX Series delivers unprecedented standard for fixed...
Described as setting an ‘unprecedented standard’ for sound system amplification in mid- to-large-sized permanent installations, the IPX Series from Dynacord incorporates three 4-channel models and one 8-channel product.
Delivering pristine audio quality for a wide variety of install settings, the IPX Series features several proprietary amplifier technologies developed by Dynacord engineers and the company’s renowned Variable Load Drive (VLD). Supporting the needs of IP networking, the amplifiers have integrated OMNEO networking (Dante audio and OCA/AES70 control) and can be configured, controlled and operated from both IRIS-Net and the SONICUE Sound System Software suite.
The three 4-channel (IPX 5:4, 10:4 and 20:4) and one 8-channel (10:8) power amplifiers offer a power density of 5 kW, 10 kW and even 20 kW from a single amplifier with all channels driven. Processing-wise, the advanced 96 kHz DSP delivers high performance, internal analogue-to-digital conversion with ultra-low latency and a superior signal-to-noise ratio, whilst Dynacord’s EcoRAIL technology helps to reduce the overall power consumption by up to 50%.
Let’s explore some of those cutting-edge features in more detail.
HIGH POWER DENSITY: IPX series amplifiers represent the perfect mix of seemingly unlimited power with intelligent FIR-drive DSP to give you the power and performance for any demanding sound system requirements in permanent installations.
HIGHLY SOPHISTICATED DIGITAL SIGNAL PROCESSING: The IPX series offers advanced 96 kHz high-resolution digital signal processing for the highest performance, internal analogue-to-digital conversion with ultra-low latency, and a superior signal-to-noise ratio. The three DSP blocks are split into user, array and speaker processing controls, each featuring a wide range of EQ, delay and level options. Complete remote control and supervision is available via software and allows the IPX series to be seamlessly integrated into both new and existing installations.
ADVANCED POWER MANAGEMENT: The ecoRAIL technology developed by Dynacord helps to reduce overall power consumption up to 50% – thereby helping to protect the environment and significantly lower the total cost of ownership, while maintaining high-quality audio and operational safety at all times. The fully DSP-controlled amplifier and power supply constantly monitors up to 280 parameters simultaneously to ensure that even under challenging operating conditions such as mains power fluctuations, the IPX series continues to perform at the highest possible level, rather than switching into a protect mode and stopping operation.
INSTALLATION FLEXIBILITY: The IPX series offers significant flexibility for a variety of installation scenarios. This is ensured by several power drive options utilising Dynacord’s patented VLD technology, as well as the newly developed parallel and parallel-bridged operation modes. For example, VLD technology allows an available output power of 1,250 watts per channel to be used at either 4 or 8 Ohms, or via 70 V or 100 V lines in direct drive mode.
To find out more about the IPX Series, as well as Dynacord’s full range of solutions for fixed installation, please visit: www.dynacord.com
Facebook: https://www.facebook.com/dynacord
Instagram: https://www.instagram.com/dynacordofficial
LinkedIn: https://www.linkedin.com/company/dynacord-official/
YouTube: https://www.youtube.com/channel/UCXds7sqa_Rq4-xH6M8ZbcZw
The post Dynacord’s IPX Series delivers unprecedented standard for fixed install appeared first on Installation.
