MGate MB3170i – From Modbus/TCP, ASCII, or RTU to Modbus/TCP, ASCII, or RTUMGate 5105-MB-EIP – From Modbus/TCP, ASCII, or RTU to EtherNet/IPMGate 5102 – From Modbus (any) or EtherNet/IP to PROFINETWe have a special going on right now for the...
 | MGate MB3170i – From Modbus/TCP, ASCII, or RTU to Modbus/TCP, ASCII, or RTU MGate 5105-MB-EIP – From Modbus/TCP, ASCII, or RTU to EtherNet/IP MGate 5102 – From Modbus (any) or EtherNet/IP to PROFINET We have a special going on right now for the most popular model, the MGate MB3170i ? Quantum Automation has over 500 units in stock! Datalogging and Trending of Analyzed Data at a SCADA or IIoT Centralized Location can help determine potential issues to minimize downtime but can also provide information to increase productivity and provide a safer environment. |
1 and 2-port advanced serial-to-Ethernet Modbus gateways
?Features and Benefits
• Supports Auto Device Routing for easy configuration
• Supports route by TCP port or IP address for flexible deployment
• Connects up to 32 Modbus TCP servers
• Connects up to 31 or 62 Modbus RTU/ASCII slaves
• Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for
each Master)
• Supports Modbus serial master to Modbus serial slave communications
• Built-in Ethernet cascading for easy wiring
• 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST
connector)
• Emergency request tunnels ensure QoS control
• Embedded Modbus traffic monitoring for easy troubleshooting
• Serial port with 2 kV isolation protection (for “-I” models)
• -40 to 75°C wide operating temperature models available
• Supports redundant dual DC power inputs and 1 relay output
• Supports Auto Device Routing for easy configuration
• Supports route by TCP port or IP address for flexible deployment
• Connects up to 32 Modbus TCP servers
• Connects up to 31 or 62 Modbus RTU/ASCII slaves
• Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for
each Master)
• Supports Modbus serial master to Modbus serial slave communications
• Built-in Ethernet cascading for easy wiring
• 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST
connector)
• Emergency request tunnels ensure QoS control
• Embedded Modbus traffic monitoring for easy troubleshooting
• Serial port with 2 kV isolation protection (for “-I” models)
• -40 to 75°C wide operating temperature models available
• Supports redundant dual DC power inputs and 1 relay output
| DATASHEET | |
| File Size: | 1481 kb |
| File Type: | |